Product Inquiry BLOG

Will RemovALL 610 would work well in the restoration of a fiberglass auto?

10th November, 2009 - Posted by Meccanator - No Comments

According to the technical staff RemovALL 510 is recommended for this task. RemovALL 610 is used for anti-fouling paint removal. Auto finishing’s are generally too tough for RemovALL 610 to penetrate. The fiberglass issue does have some variables however, because not all fiberglass is the same or in the same condition. Technical Support encourages those stripping fiberglass to be watchful and remove the paint and stripper soon after it has impacted the coating. RemovALL products should not impact the gel-coat, but if the gel-coat is cracked or has blisters then the RemovAll will naturally migrate into the unprotected resins and glues underneath. Even with these limitations, the RemovAll solution sure beats sanding.