Product Inquiry BLOG » Paint Removers

I am looking for RemovALL 310 but can no longer find it?

CK — Sat, 28 May 2011 22:43:16 +0000

Due to manufacturing and import of RemovALL products from Australia we have reduced product offerings. As the shelf life of RemovALL 310 is shorter than many other RemovALL varieties we no longer stock that item. We recommend DoradoStrip 3031 which works much in the same manner and produces equivalent results.

Lastly you might try an internet search to locate an alternate distribution point.

I have a technical question about DoradoStrip paint strippers – where should I turn?

CK — Sat, 28 May 2011 22:21:10 +0000

We have access to a premier technical support partner for the DoradoStrip product line. Contact technical support

Please refrain from using our telephone order line for DoradoStrip technical questions. Our order takers will not be able to assist you in technical matters, instead use the link above to communicate with a qualified representative.

DO NOT send confidential account and/or credit card information or requests to this link… as this link is solely for technical questions and support and is handled by a third party.

I have a technical question about RemovALL paint removers – where should I turn?

CK — Sat, 28 May 2011 22:18:15 +0000

We have access to a premier technical support partner for the RemovALL product line. Contact technical support

Please refrain from using our telephone order line for RemovALL technical questions. Our order takers will not be able to assist you in technical matters, instead use the link above to communicate with a qualified representative.

DO NOT send confidential account and/or credit card information or requests to this link… as this link is solely for technical questions and support and is handled by a third party.

Which doradostrip product is used for plaster walls?

CK — Fri, 25 Mar 2011 19:05:27 +0000

The product of choice for this application is DoradoStrip 3031. Your challenge will be in determining proper dwell time. On typical applications Doradostrip 3031 is applied and then simply left alone to do its work. On plaster applications a bit more babysitting time is required. (i.e. the paint will generally release from the plaster in 1 to 4 hours, however the plaster itself will also soften and begin to release from the substrate if the remover is left alone too long).

Our best advice: Always perform a test area and work in smaller areas until the process (or dwell time) becomes clear with results that you can easily reproduce. Never leave DoradoStrip 3031 alone to work by itself when applying on a plaster surface.

Where did the RemovALL products go?

CK — Mon, 14 Mar 2011 22:40:13 +0000

The Global rights of the Canadian manufacturer Napier Environmental Technologies was acquired by Freeworld Coatings Global a paint manufacturer with head offices in South Africa during 2009. Inventory stocking issues were experienced during a transitional period. Those issues are now resolved and RemovALL / Bio-Wash Natural Deck Oil products are once again available in North America.

Please consult the appropriate link below for product information & availability:

Bio-Wash Natural Deck Oil

RemovALL 120 Safe Etch for Concrete

RemovALL 200 Dip Tank

RemovALL 220 All Purpose Industrial Paint Remover

RemovALL 320 All Purpose Architectural Paint Remover

RemovALL 400 Graffiti and Overspray remover

RemovALL 520 High Performance Coatings Remover

RemovALL 620 Marine/Anti-Fouling Paint Remover

RemovALL 700 Floor Adhesive Remover-Foam Off

RemovALL 820 Rust Remover & Inhibitor

RemovALL Waste Paint Hardener

How much surface area will the RemovALL strippers cover?

Meccanator — Tue, 10 Nov 2009 18:56:23 +0000

Depending on the amount of layers you’re trying to remove, RemovALL will cover anywhere from 40-90 sq ft per gallon (1 to 2.2 sq.m/Litre).

Can I brush RemovALL paint remover on?

Meccanator — Tue, 10 Nov 2009 18:55:15 +0000

You can brush on the following products:

RemovALL 220
RemovALL 320

The rest of the paint removers have a gel consistency and require airless sprayer application.

How do I know if the RemovALL product is working?

Meccanator — Tue, 10 Nov 2009 18:52:51 +0000

After applying the product to the surface, you should notice tiny little bubbles forming on the top of the surface. When you see those, you know it’s working. The RemovALL products are based on SARA technology (Selective Adhesion Release Agent), which works by releasing the bond between the coating(s) and the substrate (surface).

How much paint will the RemovALL remove?

Meccanator — Tue, 10 Nov 2009 18:52:07 +0000

Depending on the type of paint, the RemovALL products will remove anywhere from 3-9 layers of paint. The product must be applied one and a half to two times the thickness of the coating you’re trying to remove. You should simply not be able to see your underlying paint.

How long does RemovALL take to remove paint?

Meccanator — Tue, 10 Nov 2009 18:49:39 +0000

The best way to determine this answer is to do a test area. Apply the stripper on a small area of your project. This will tell you exactly how the stripper will perform and how long it will take. The time really depends on what type of coating you’re trying to remove and how many layers of paint you’re trying to remove. Coating removal time will vary anywhere from 2 to 24 hours.