Product Inquiry BLOG » Wood Care

Can I use the Trade Secret scratch removers on any type of wood?

Meccanator — Fri, 06 Nov 2009 18:47:30 +0000

Yes. The Scratch Removers are designed to work with the existing finish or varnish. We have been selling them to furniture factories and cabinetmakers since 1950. Use the Dark Scratch Remover for darker colors like walnut, mahogany and cherry. Use the Light Scratch Remover for lighter finishes like maple, oak and pine.

Is Trade Secret scratch remover permanent?

Meccanator — Fri, 06 Nov 2009 18:46:46 +0000

Yes. Apply the Scratch Remover to the surface and allow to dry for 15 to 30 minutes. Wipe off any excess material. The result will stay that way for many years.

Why is Trade Secret® better than the competition?

Meccanator — Fri, 06 Nov 2009 18:45:58 +0000

Trade Secret is highly concentrated and lasts up to 5 times longer. The staining action penetrates deeply into the surface and won’t discolor with age. It’s easier to apply and tested to work with virtually any finish including shellac, varnish, lacquer, polyurethane and even French Polish.

Can I damage my furniture with Trade Secret®?

Meccanator — Fri, 06 Nov 2009 18:45:18 +0000

Absolutely not. Our products have been tested and used by leading furniture manufacturers and cabinetmakers for over 50 years. These products are unique for consumers but not for professionals. That’s why we call it ‘Trade Secret’. Try them, You’ll love the difference. As with all repair products, we suggest that you test it first on an inconspicuous area to ensure best results.

Will the Trade Secret scratch remover remove the scratches completely?

Meccanator — Fri, 06 Nov 2009 18:44:08 +0000

Trade Secret^® Scratch Remover will remove the eyesore and bring the wood back to life. The physical impression will still be there, but it will be camouflaged and rendered almost invisible.

Is Trade Secret Scratch Remover safe if you have small children or pets?

Meccanator — Fri, 06 Nov 2009 18:43:21 +0000

All cleaning products should be kept out of the reach of small children, but once Trade Secret is applied and dries, it is no problem whatsoever for children or pets.

Can Trade Secret be used on veneer?

Meccanator — Fri, 06 Nov 2009 18:37:19 +0000

Yes. Veneer is simply a thin slice of wood on the surface that is glued to plywood or particle board. Trade Secret^® can be used on all solid wood and veneer.

Can I stain bare wood with Trade Secret Scratch Remover?

Meccanator — Fri, 06 Nov 2009 18:36:35 +0000

Yes. However, it is not designed for that application and will not be as effective as a standard wood stain. For effective water based wood stains click here.

Can I use the Trade Secret® Scratch Removers to remove water stains on furniture?

Meccanator — Fri, 06 Nov 2009 18:35:52 +0000

Trade Secret^® Scratch Removers work with the finish of furniture. If the water stain is on the surface, the scratch remover will wipe the eye sore away. However, in those cases where the stain has permeated into the finish, an additional step is required. Using toothpaste, lightly rub the affected area then remove any excess paste. At this point, apply the Trade Secret Scratch Remover and the defect should mostly or completely disappear. It is always a good idea to try this on an inconspicuous area first to ensure that the repair leaves the desired results. In some cases, you may have to call a professional. Call us first so that we can point you in the right direction.

Which Trade Secret Scratch Remover should I use on my furniture?

Meccanator — Fri, 06 Nov 2009 18:35:08 +0000

Trade Secret^® offers a Scratch Remover for light wood and one for dark wood. The general rule of thumb is that the light is used on light oak, maple, pine and other woods in the lighter tones, while the dark scratch remover is used for mahogany, walnut, dark oak, cherry and more. Medium toned woods tend to work better with the dark scratch remover, but if you’re ever in doubt, test the scratch remover in an inconspicuous area.